[Tuto] Multigame Free Ringedge 2 Niko
-
- stick de plastique
- Messages : 26
- Inscription : 29 sept. 2012, 22:12
- A remercié : 0
- A été remercié : 0
Re: [Tuto] Multigame Free Ringedge 2 Niko
@layer
So I took your advice I used the RE1 image restored to the SSD. I used acronis boot iso and backed up the primar partition
I then restored the RE2 image using the guide once complete I then restored the RE1 partition over the RE2 primary partition.
I then locked the drive with Victoria and the pony.txt key.
When I boot the drive on the RE1 It seems to be working. I will give it a full run through later. I didnt get to check any games as I need work
PS if anyone knows what the ram specs are it would be cool
So I took your advice I used the RE1 image restored to the SSD. I used acronis boot iso and backed up the primar partition
I then restored the RE2 image using the guide once complete I then restored the RE1 partition over the RE2 primary partition.
I then locked the drive with Victoria and the pony.txt key.
When I boot the drive on the RE1 It seems to be working. I will give it a full run through later. I didnt get to check any games as I need work
PS if anyone knows what the ram specs are it would be cool
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
Why do you want to know RE1 RAM specs ? It's an obsolete hardware. Default RAM is 1 GB DDR2 PC2-6400.purplec a écrit : ↑08 juil. 2020, 14:29 @layer
So I took your advice I used the RE1 image restored to the SSD. I used acronis boot iso and backed up the primar partition
I then restored the RE2 image using the guide once complete I then restored the RE1 partition over the RE2 primary partition.
I then locked the drive with Victoria and the pony.txt key.
When I boot the drive on the RE1 It seems to be working. I will give it a full run through later. I didnt get to check any games as I need work
PS if anyone knows what the ram specs are it would be cool
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
Possibly. system16.com tells the specs I have written,
DoA5U has a few slowdowns as well on RE1.
Let me know when you'll test everything.
DoA5U has a few slowdowns as well on RE1.
Let me know when you'll test everything.
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
-
- stick de plastique
- Messages : 26
- Inscription : 29 sept. 2012, 22:12
- A remercié : 0
- A été remercié : 0
Re: [Tuto] Multigame Free Ringedge 2 Niko
Hi Layer
Last night was the first time I got try properly.
Everything boots to the game selection screen but when I select a game I get a black windows screen with
\RE2multi\assets
Last night was the first time I got try properly.
Everything boots to the game selection screen but when I select a game I get a black windows screen with
\RE2multi\assets
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
Is re2multi key put in C:\RE2Multi\ ?
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
-
- stick de plastique
- Messages : 26
- Inscription : 29 sept. 2012, 22:12
- A remercié : 0
- A été remercié : 0
Re: [Tuto] Multigame Free Ringedge 2 Niko
Hi I just unlocked the drive and and the key is where it should be.
I have a key chip in could it be that or the dips?
Like when it boots in the Ringedge it mounts and gives the select screen it just fails when loading the game
I have a key chip in could it be that or the dips?
Like when it boots in the Ringedge it mounts and gives the select screen it just fails when loading the game
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
Remove the physical keychip or it won't allow to RE1 mobo to mount the Multigame volume.
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
If you want to launch RE1, RE2 and RingWide games different than the Multigame, the game structure has to be as follows :
A folder with the name of the game [4 digits dongle code (dongle code is optional)].
In the folder : a picture of the game in jpg format and a short movie in mp4 format (the movie is optional).
Still in the folder of the game, create a subfolder called Game.
In that Game subfolder, put the files of the game with a batch file called game.bat, mxGetHwInfo.exe and mxGetHwInfo.ini (.ini has to be edited with RingEdge or RE2 settings).
game.bat has to be like this :
mxGetHwInfo.exe -s mxGetHwInfo.ini
if %ERRORLEVEL% == 0 start /wait executable_game_name.exe
Dernière modification par Layer le 18 juil. 2020, 14:19, modifié 1 fois.
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
- el_nino
- stick d'or
- Contact :
- Messages : 1298
- Inscription : 28 août 2006, 22:01
- Localisation : 70
- A remercié : 1 fois
- A été remercié : 13 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
Parlons un peu français ici
J'ai cru comprendre qu'au démarrage du jeu, le contenu du keychip permettant d'accéder à la partition du jeu était visible.
Pour la récupérer il fallait débrancher la nappe SATA de la ringedge et la brancher sur un PC
qqn a déjà essayé ?
Dans quel répertoire se trouve ce fichier ?
J'ai cru comprendre qu'au démarrage du jeu, le contenu du keychip permettant d'accéder à la partition du jeu était visible.
Pour la récupérer il fallait débrancher la nappe SATA de la ringedge et la brancher sur un PC
qqn a déjà essayé ?
Dans quel répertoire se trouve ce fichier ?
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
La technique du hotswap consiste, après le boot du jeu, à laisser l'alim du SSD relié au RingEdge/Ringwide/RinEdge 2 et débrancher le SATA pour le relier à un ordi de façon à accéder au contenu du SSD.el_nino a écrit : ↑18 juil. 2020, 12:26 Parlons un peu français ici
J'ai cru comprendre qu'au démarrage du jeu, le contenu du keychip permettant d'accéder à la partition du jeu était visible.
Pour la récupérer il fallait débrancher la nappe SATA de la ringedge et la brancher sur un PC
qqn a déjà essayé ?
Dans quel répertoire se trouve ce fichier ?
Je n'ai pas testé pour 3 raisons :
L'alim est solidaire de la nappe SATA pour connecter un SSD sur une mobo RingEdge/Ringwide/RingEdge 2 ;
c'est potentiellement risqué pour le SSD ;
je ne possède pas de jeu dont je n'ai pas la clé.
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
I have added 7 games :
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
-
- stick de plastique
- Messages : 26
- Inscription : 29 sept. 2012, 22:12
- A remercié : 0
- A été remercié : 0
Re: [Tuto] Multigame Free Ringedge 2 Niko
Nice one. I get the same pic as you on the 1st screen just nothing when it tries to load.
I get the X:\RE2Multi\ ?
Good job @layer. I might have to wait until my graphics card has to come for my RE 2 I just don’t know what’s wrong with the RE1
Could it be the roms missing in the folders?
I get the X:\RE2Multi\ ?
Good job @layer. I might have to wait until my graphics card has to come for my RE 2 I just don’t know what’s wrong with the RE1
Could it be the roms missing in the folders?
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
X:/RE2Multi matches the 4th volume of the Multigame image.
Mount the 4th volume with TrueCrypt to check if the launcher is there and complete.
Mount the 4th volume with TrueCrypt to check if the launcher is there and complete.
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
-
- stick de plastique
- Messages : 26
- Inscription : 29 sept. 2012, 22:12
- A remercié : 0
- A été remercié : 0
Re: [Tuto] Multigame Free Ringedge 2 Niko
Ok when I unlocked the drive and unlock the 4th partition it’s a 2.0GB partition and it has 2 files
RE2Multi
Game.bat
The RE2Multi folder has 2 sub folders of
assets
Menu
The game.bat has the following below inside
@echo off
cd .\RE2multi\assets\
start /wait rerun.exe
RE2Multi
Game.bat
The RE2Multi folder has 2 sub folders of
assets
Menu
The game.bat has the following below inside
@echo off
cd .\RE2multi\assets\
start /wait rerun.exe
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
Does it contain RE2Multi.exe, JVS dll and the other files ?
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
It should be re2multi.exe. You're right.
I think your issue may be due to mxGetHwInfo.ini [OS] not edited (in your Game subfolder).
Try to put OSVersion = 0000.00.00 (all OS Versions permitted).
I think your issue may be due to mxGetHwInfo.ini [OS] not edited (in your Game subfolder).
Try to put OSVersion = 0000.00.00 (all OS Versions permitted).
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
-
- stick de plastique
- Messages : 26
- Inscription : 29 sept. 2012, 22:12
- A remercié : 0
- A été remercié : 0
Re: [Tuto] Multigame Free Ringedge 2 Niko
Ok I just checked blade Arcus and .bat is very different to
mxGetHwInfo.exe -s mxGetHwInfo.ini
if %ERRORLEVEL% == 0 start /wait executable_game_name.exe
And the folder doesn’t have mxGetHwInfo.exe mxGetHwInfo.ini files either
To be clear should I have the two extra files
So I should have the
mxGetHwInfo.exe
mxGetHwInfo.ini
And the game.bat should be
mxGetHwInfo.exe -s mxGetHwInfo.ini
if %ERRORLEVEL% == 0 start /wait crus.exe
Thanks for your help on this
mxGetHwInfo.exe -s mxGetHwInfo.ini
if %ERRORLEVEL% == 0 start /wait executable_game_name.exe
And the folder doesn’t have mxGetHwInfo.exe mxGetHwInfo.ini files either
To be clear should I have the two extra files
So I should have the
mxGetHwInfo.exe
mxGetHwInfo.ini
And the game.bat should be
mxGetHwInfo.exe -s mxGetHwInfo.ini
if %ERRORLEVEL% == 0 start /wait crus.exe
Thanks for your help on this
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
This game.bat model has to be used with games that don't belong to All.Net P-ras Multi games, so Blade Arcus doesn't use mxGetHwInfo ini and exe.
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
Blade Arcus game.bat should be like this :
Code : Tout sélectionner
start /wait /min mxWritePrerenderedFrames.exe -s 1
start /wait crus.exe
I have made some tests in launching games with "mxWritePrerenderedFrames.exe -s 0", and I get :
Code : Tout sélectionner
start /wait /min mxWritePrerenderedFrames.exe -s 0
start /wait executable_game_name.exe
- Sonic & Sega All-Stars Racing Arcade (Ringwide) Bad (it may be due to OS version) ;
- Dream Raiders (Ringwide) OK (but need a specific i/o to work) ;
- Melty Blood Actress Again Current Code (Ringwide) OK ;
- Chaos Code (Ringwide) OK ;
- Initial D Arcade Stage 6 AA Bad ;
- Let's Go Jungle (Ringwide) Bad.
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X
-
- stick de zinc
- Messages : 336
- Inscription : 15 juil. 2004, 15:16
- A remercié : 0
- A été remercié : 3 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
il fonctionne le lien torrent ?! ça fait 24h qu'il tourne et je suis toujours à 0%...
il existe une alternative ? un lien mega par exemple ?
thx
il existe une alternative ? un lien mega par exemple ?
thx
Dernière modification par z1z159 le 27 juil. 2020, 13:40, modifié 1 fois.
- Layer
- stick de diamant
- Messages : 8132
- Inscription : 15 août 2006, 16:44
- A remercié : 1 fois
- A été remercié : 11 fois
Re: [Tuto] Multigame Free Ringedge 2 Niko
https://pan.baidu.com/share/init?surl=Z ... vAVUqqG7ZA (pass : h5r9)
Bornes Vewlix L & F jp, Lindbergh Universal cab SD, 6 superguns, PCBs divers & CM : MVS, MegaPlay, ST-V jp, HyperNG64, PGM 1 & 2, Naomi 2 jp + GD-ROM & Net DIMM 512 Mo fw 3.17, F3 jp, G-Net flashée, Chihiro t3 jp, AW jp, Lindbergh yellow jp, TX0, TX2, TX3, RingEdge 1 & 2 jp, ES3X