[Tuto] Multigame Free Ringedge 2 Niko

[purplec]

@layer

So I took your advice I used the RE1 image restored to the SSD. I used acronis boot iso and backed up the primar partition

I then restored the RE2 image using the guide once complete I then restored the RE1 partition over the RE2 primary partition.

I then locked the drive with Victoria and the pony.txt key.

When I boot the drive on the RE1 It seems to be working. I will give it a full run through later. I didnt get to check any games as I need work

PS if anyone knows what the ram specs are it would be cool

[Layer]

@layer

So I took your advice I used the RE1 image restored to the SSD. I used acronis boot iso and backed up the primar partition

I then restored the RE2 image using the guide once complete I then restored the RE1 partition over the RE2 primary partition.

I then locked the drive with Victoria and the pony.txt key.

When I boot the drive on the RE1 It seems to be working. I will give it a full run through later. I didnt get to check any games as I need work

PS if anyone knows what the ram specs are it would be cool

Why do you want to know RE1 RAM specs ? It's an obsolete hardware. Default RAM is 1 GB DDR2 PC2-6400.

[purplec]

I believe DOA needs 2GB to function or else you get a blue screen

My ram seems to be be 1GB DDR 2 800 mhz

[Layer]

Possibly. system16.com tells the specs I have written,

DoA5U has a few slowdowns as well on RE1.

Let me know when you'll test everything.

[purplec]

Hi Layer

Last night was the first time I got try properly.

Everything boots to the game selection screen but when I select a game I get a black windows screen with

\RE2multi\assets

[Layer]

Is re2multi key put in C:\RE2Multi\ ?

[purplec]

Hi I just unlocked the drive and and the key is where it should be.

I have a key chip in could it be that or the dips?

Like when it boots in the Ringedge it mounts and gives the select screen it just fails when loading the game

[Layer]

Remove the physical keychip or it won't allow to RE1 mobo to mount the Multigame volume.

[Layer]

Hi I just unlocked the drive and and the key is where it should be.

I have a key chip in could it be that or the dips?

Like when it boots in the Ringedge it mounts and gives the select screen it just fails when loading the game

If you want to launch RE1, RE2 and RingWide games different than the Multigame, the game structure has to be as follows :

A folder with the name of the game [4 digits dongle code (dongle code is optional)].

In the folder : a picture of the game in jpg format and a short movie in mp4 format (the movie is optional).

Still in the folder of the game, create a subfolder called Game.

In that Game subfolder, put the files of the game with a batch file called game.bat, mxGetHwInfo.exe and mxGetHwInfo.ini (.ini has to be edited with RingEdge or RE2 settings).

game.bat has to be like this :

mxGetHwInfo.exe -s mxGetHwInfo.ini
if %ERRORLEVEL% == 0 start /wait executable_game_name.exe

[el_nino]

Parlons un peu français ici

J'ai cru comprendre qu'au démarrage du jeu, le contenu du keychip permettant d'accéder à la partition du jeu était visible.
Pour la récupérer il fallait débrancher la nappe SATA de la ringedge et la brancher sur un PC
qqn a déjà essayé ?
Dans quel répertoire se trouve ce fichier ?

[Layer]

Parlons un peu français ici

J'ai cru comprendre qu'au démarrage du jeu, le contenu du keychip permettant d'accéder à la partition du jeu était visible.
Pour la récupérer il fallait débrancher la nappe SATA de la ringedge et la brancher sur un PC
qqn a déjà essayé ?
Dans quel répertoire se trouve ce fichier ?

La technique du hotswap consiste, après le boot du jeu, à laisser l'alim du SSD relié au RingEdge/Ringwide/RinEdge 2 et débrancher le SATA pour le relier à un ordi de façon à accéder au contenu du SSD.

Je n'ai pas testé pour 3 raisons :

L'alim est solidaire de la nappe SATA pour connecter un SSD sur une mobo RingEdge/Ringwide/RingEdge 2 ;
c'est potentiellement risqué pour le SSD ;
je ne possède pas de jeu dont je n'ai pas la clé.

[purplec]

Tried without the key chip and it’s stii not working.

Ah I’m so close it’s killing me

[Layer]

Tried without the key chip and it’s stii not working.

Ah I’m so close it’s killing me

I have added 7 games :

[purplec]

Nice one. I get the same pic as you on the 1st screen just nothing when it tries to load.

I get the X:\RE2Multi\ ?

Good job @layer. I might have to wait until my graphics card has to come for my RE 2 I just don’t know what’s wrong with the RE1

Could it be the roms missing in the folders?

[Layer]

X:/RE2Multi matches the 4th volume of the Multigame image.

Mount the 4th volume with TrueCrypt to check if the launcher is there and complete.

[purplec]

Ok when I unlocked the drive and unlock the 4th partition it’s a 2.0GB partition and it has 2 files

RE2Multi
Game.bat


The RE2Multi folder has 2 sub folders of
assets
Menu

The game.bat has the following below inside
@echo off

cd .\RE2multi\assets\
start /wait rerun.exe

[Layer]

Does it contain RE2Multi.exe, JVS dll and the other files ?

[purplec]

The folder called menu has all the .dll files and an exe called re2multi.exe

Is it case sensitive? Should it be RE2Multi.exe

[Layer]

It should be re2multi.exe. You're right.

I think your issue may be due to mxGetHwInfo.ini [OS] not edited (in your Game subfolder).
Try to put OSVersion = 0000.00.00 (all OS Versions permitted).

[purplec]

Ok I just checked blade Arcus and .bat is very different to

mxGetHwInfo.exe -s mxGetHwInfo.ini
if %ERRORLEVEL% == 0 start /wait executable_game_name.exe


And the folder doesn’t have mxGetHwInfo.exe mxGetHwInfo.ini files either

To be clear should I have the two extra files
So I should have the

mxGetHwInfo.exe
mxGetHwInfo.ini

And the game.bat should be
mxGetHwInfo.exe -s mxGetHwInfo.ini
if %ERRORLEVEL% == 0 start /wait crus.exe

Thanks for your help on this

[Layer]

This game.bat model has to be used with games that don't belong to All.Net P-ras Multi games, so Blade Arcus doesn't use mxGetHwInfo ini and exe.

[purplec]

Ok so virtua tennis would need to use the config above but what would blade Arcus.bat be

[Layer]

Ok so virtua tennis would need to use the config above but what would blade Arcus.bat be

Blade Arcus game.bat should be like this :

Code : Tout sélectionner

start /wait /min mxWritePrerenderedFrames.exe -s 1
start /wait crus.exe

Edit :

I have made some tests in launching games with "mxWritePrerenderedFrames.exe -s 0", and I get :

Code : Tout sélectionner

start /wait /min mxWritePrerenderedFrames.exe -s 0
start /wait executable_game_name.exe

- Virtua Tennis 4 OK ;
- Sonic & Sega All-Stars Racing Arcade (Ringwide) Bad (it may be due to OS version) ;
- Dream Raiders (Ringwide) OK (but need a specific i/o to work) ;
- Melty Blood Actress Again Current Code (Ringwide) OK ;
- Chaos Code (Ringwide) OK ;
- Initial D Arcade Stage 6 AA Bad ;
- Let's Go Jungle (Ringwide) Bad.

[z1z159]

il fonctionne le lien torrent ?! ça fait 24h qu'il tourne et je suis toujours à 0%...

il existe une alternative ? un lien mega par exemple ?

thx

[Layer]

il fonctionne le lien torrent ?! ça fait 24h qu'il tourne et je suis toujours à 0%...

il existe une alternative ? un lien mega par example ?

thx

https://pan.baidu.com/share/init?surl=Z ... vAVUqqG7ZA (pass : h5r9)