[RECH] Stick d'origine Borne Arcades - Une vingtaine de pièces de 1 Franc Suisse + [VDS]CPS2 / io / Ringedge / Lindbergh
- el_nino
- stick d'or
- Contact :
- Messages : 1298
- Inscription : 28 août 2006, 22:01
- Localisation : 70
- A remercié : 1 fois
- A été remercié : 13 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh Multi - el_nino SHOP
Pour l'alim tu branches directement une alim de PC sur la Lindbergh.
Sur ma dédiée Hod4, j'ai bien une alim SEGA avec une sortie de typer ATX par exemple...mais je ne pense pas que tu trouves ce types d'alim dans une autre borne.
J'ai lu qu'une alim de 400w était recommandée, mais j'ai déjà fait tourner avec moins.
Pour After Burner, jamais lancé de mon côté.
A part la version hackée avec pad filaire Xbox 360, ça doit être injouable au stick, on doit être sur de l'analogique.
Sur ma dédiée Hod4, j'ai bien une alim SEGA avec une sortie de typer ATX par exemple...mais je ne pense pas que tu trouves ce types d'alim dans une autre borne.
J'ai lu qu'une alim de 400w était recommandée, mais j'ai déjà fait tourner avec moins.
Pour After Burner, jamais lancé de mon côté.
A part la version hackée avec pad filaire Xbox 360, ça doit être injouable au stick, on doit être sur de l'analogique.
-
- stick d'or
- Messages : 1265
- Inscription : 02 févr. 2017, 18:44
- A remercié : 0
- A été remercié : 0
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh Multi - el_nino SHOP
hello
ton Lindbergh Multi est il parametré pour joué avec controller XBOX 360? Si oui sa marche bien?
on utilise quoi comme sorti video? VGA? Component ou dmi? Quelles sont les res dispo? peut on forcer le 16/9 sans deformation?
Merci
ton Lindbergh Multi est il parametré pour joué avec controller XBOX 360? Si oui sa marche bien?
on utilise quoi comme sorti video? VGA? Component ou dmi? Quelles sont les res dispo? peut on forcer le 16/9 sans deformation?
Merci
- el_nino
- stick d'or
- Contact :
- Messages : 1298
- Inscription : 28 août 2006, 22:01
- Localisation : 70
- A remercié : 1 fois
- A été remercié : 13 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh Multi - el_nino SHOP
Up et réponse un peu tardive !backtothemustache a écrit : ↑23 févr. 2019, 16:37 hello
ton Lindbergh Multi est il parametré pour joué avec controller XBOX 360? Si oui sa marche bien?
on utilise quoi comme sorti video? VGA? Component ou dmi? Quelles sont les res dispo? peut on forcer le 16/9 sans deformation?
Merci
Alors étant un hack du 9.6, oui possible de jouer au pad filaire 360 mais jamais testé !
Les réso sont écrites dans le menu donc à priori celles ci :
http://sega-lindbergh.blogspot.com/2016 ... kalus.html
Je peux pousser un peu l'investigation si tu veux...
- el_nino
- stick d'or
- Contact :
- Messages : 1298
- Inscription : 28 août 2006, 22:01
- Localisation : 70
- A remercié : 1 fois
- A été remercié : 13 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh Multi - Part NUC - el_nino SHOP
Des morceaux de Maze of the Kings ...
UP
UP
- el_nino
- stick d'or
- Contact :
- Messages : 1298
- Inscription : 28 août 2006, 22:01
- Localisation : 70
- A remercié : 1 fois
- A été remercié : 13 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
J'ai des boitiers vides si ça vous tente...
- PenPen
- stick d'argent
- Messages : 843
- Inscription : 05 mai 2004, 17:34
- Localisation : Epinay sous Sénart (91)
- A remercié : 4 fois
- A été remercié : 3 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
Des boitiers Lindbergh ?
Tu as aussi des DVD d'installation de jeux Lindy?
- el_nino
- stick d'or
- Contact :
- Messages : 1298
- Inscription : 28 août 2006, 22:01
- Localisation : 70
- A remercié : 1 fois
- A été remercié : 13 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
Boitier de carte mère, la boite métallique quoi avec l'électronique dedans
DVD : Peut être, tu cherches quoi ?
MP
- noiraude
- stick de platine
- Messages : 2359
- Inscription : 16 oct. 2012, 10:34
- A remercié : 1 fois
- A été remercié : 12 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
Intéressé par le Taito X2, mais j'ai besoin d'infos. Ca se présente comment ? Faut obligatoirement du JVS pour en profiter, ou je peux brancher ça directement sur un écran, voire sur un port jamma ?
- el_nino
- stick d'or
- Contact :
- Messages : 1298
- Inscription : 28 août 2006, 22:01
- Localisation : 70
- A remercié : 1 fois
- A été remercié : 13 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
C'est effectivement une carte JVS un peu comme la NAOMI, mais elle se branche directement sur le 220V.
Si tu as un supergun JAMMA, je peux te laisser un convertisseur SEGA v1 avec.
Tu récupères le son via le JACK, la video via le DVI.
- noiraude
- stick de platine
- Messages : 2359
- Inscription : 16 oct. 2012, 10:34
- A remercié : 1 fois
- A été remercié : 12 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
[MAJ] Hop, me revoilà. Je t'explique mon souci: j'ai un gros supergun connecté à un écran BO cathodique. Ce que je voudrais, c'est faire sortir le signal vidéo sur cet écran, mais je n'ai apparemment pas d'entrée VGA, et encore moins DVI. Il existe une solution pour afficher le signal vidéo du Taito X2 sur cet écran? D'ailleurs, c'est quoi comme signal ? HD ou basse def ? L'idée, c'est que je voudrais éviter de passer par un moniteur PC...
- el_nino
- stick d'or
- Contact :
- Messages : 1298
- Inscription : 28 août 2006, 22:01
- Localisation : 70
- A remercié : 1 fois
- A été remercié : 13 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
La X2 a deux config video possible :
une 31k "NAOMI"
une 31k "HD"
Ton écran est 15k, donc sans convertisseur qui te sort un truc dégelasse, pas possible.
Par contre sur l'écran HD du salon pas de problème
une 31k "NAOMI"
une 31k "HD"
Ton écran est 15k, donc sans convertisseur qui te sort un truc dégelasse, pas possible.
Par contre sur l'écran HD du salon pas de problème
- noiraude
- stick de platine
- Messages : 2359
- Inscription : 16 oct. 2012, 10:34
- A remercié : 1 fois
- A été remercié : 12 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
C'est tout le problème: j'ai pas le droit de coller le supergun à l'écran du salon. Madâââme ne veut pas
- whatchapopo
- stick de bronze
- Contact :
- Messages : 174
- Inscription : 22 mai 2007, 18:39
- Localisation : 17
- A remercié : 0
- A été remercié : 1 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
Tu as des petits lcd vga plein le bon coin
né au Géo
Borne crazy taxy - Sega blast X2- new delta32 - SNK U4-25 - Aerocity - et une brochette de flips
Borne crazy taxy - Sega blast X2- new delta32 - SNK U4-25 - Aerocity - et une brochette de flips
- noiraude
- stick de platine
- Messages : 2359
- Inscription : 16 oct. 2012, 10:34
- A remercié : 1 fois
- A été remercié : 12 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
Putain je sais, mais y’a déjà trop de cathodiques dans mon bureau. Je peux pas encore rajouter un lcd, je vais me faire cramer la gueule à coups de résistance de sèche cheveux...
- whatchapopo
- stick de bronze
- Contact :
- Messages : 174
- Inscription : 22 mai 2007, 18:39
- Localisation : 17
- A remercié : 0
- A été remercié : 1 fois
Re: i/o type 1 & 2 - carte mère Taito X2 + Lindbergh - Ringedge - Boitier vide el_nino SHOP
On en a des problèmes
né au Géo
Borne crazy taxy - Sega blast X2- new delta32 - SNK U4-25 - Aerocity - et une brochette de flips
Borne crazy taxy - Sega blast X2- new delta32 - SNK U4-25 - Aerocity - et une brochette de flips