Lindbergh Yellow+multigame with Virtua Fighter 5 FS and 5R

[lcommander]

@lcommander, try going into the settings menu and changing cabinet type to Upright. That is the only way I can get OutRun 2 to work. I wonder if this effects the network functionality for OutRun 2? Can two upright cabinets be linked in a real arcade? I would be curious to see if network mode works if you could change the cabinet style to a regular sit down unit. Fingers crossed for a future update.

thanks pal! OutRun 2 is OK now
but some other racing game show different error on xb360 mode

ID4 EXP always say error 15, but the JAP version is OK

ID5 show error 417 but I don't understand japanese message

Hummer Extreme show error 1002 with network settings?

Harley davidson king of the road show caution 51 wrong resolution setting or error 7702 serial timeout

dose these game need some different settings?

[vectrex_rox]

Agent47: does this work in link mode now ????

[Agent47]

Icommander, error 417 on ID5 is a card reader error. You need to go the system settings and turn off the card reader, then the game will play fine. Both ID4 and ID5 used the card reader to save games, so you need to check the settings on ID4 EXP also to make sure the card reader is turned off. Hopefully that will fix your problem.

For Hummer Extreme, you need to go to settings and change cabinet type to Upright. Also, the first time I played I had to go to the Calibration Settings and set my wheel before the game would start properly. But I'm using a Logitech racing wheel, not the Xbox 360 pad. But you may want to try it anyway. Finally, on the Lindbergh settings screen that is displayed before the game starts, choose Network Settings and make sure the IP Address is showing 0.0.0.000

For Harley Davidson, make sure you have the cabinet type set to Standard so that the motion settings of the Deluxe cabinet are disabled. Otherwise, the game will not start.

vectrex_rox, I still cannot get OutRun 2 to work in linked mode, sadly. If you ever find a combination of settings that work, please post it here! Otherwise, I guess we'll have to just hope for an update.

[lcommander]

Icommander, error 417 on ID5 is a card reader error. You need to go the system settings and turn off the card reader, then the game will play fine. Both ID4 and ID5 used the card reader to save games, so you need to check the settings on ID4 EXP also to make sure the card reader is turned off. Hopefully that will fix your problem.

For Hummer Extreme, you need to go to settings and change cabinet type to Upright. Also, the first time I played I had to go to the Calibration Settings and set my wheel before the game would start properly. But I'm using a Logitech racing wheel, not the Xbox 360 pad. But you may want to try it anyway. Finally, on the Lindbergh settings screen that is displayed before the game starts, choose Network Settings and make sure the IP Address is showing 0.0.0.000

For Harley Davidson, make sure you have the cabinet type set to Standard so that the motion settings of the Deluxe cabinet are disabled. Otherwise, the game will not start.

vectrex_rox, I still cannot get OutRun 2 to work in linked mode, sadly. If you ever find a combination of settings that work, please post it here! Otherwise, I guess we'll have to just hope for an update.

Hummer Extreme seems not have the settings about the cabinet?
on Network Settings I have change all IP to 0.0.0.0 but still error 6005
Harley davidson has the same error with network

[mar.vetto1]

do you have 9.5 version or 9.6 version?

9.5 version had problem with Harley, all the otther games work 100%

All the problems you have with games are about the game setting.

[deep]

Could you post a link for the update ?
Thx.

[aurelien123]

img20160512_104441.jpg

img20160512_104508.jpg

Slt à tous encore un petit pb avec ma lindy 9.6
Explication du pb en premier temps je branche ma lindy sur ma nuc pour sélectionner les jeux la flèche va de bas en haut donc dur de sélectionner les jeux (doit changer i/o ds le moi)
Je décide de la branché sur la télé avec une manette Xbox 360 pour testé des jeux quand même et la j'arrive sur l'écran de sélection et impossible de choisir un jeu rien ne bouge ma manette est allumé (me suis peu être trompé d usb en la branchant ) ou je sais pas
Merci de votre aide

[mar.vetto1]

Could you post a link for the update ?
Thx.

contact me in pm

[mar.vetto1]

Slt à tous encore un petit pb avec ma lindy 9.6
Explication du pb en premier temps je branche ma lindy sur ma nuc pour sélectionner les jeux la flèche va de bas en haut donc dur de sélectionner les jeux (doit changer i/o ds le moi)
Je décide de la branché sur la télé avec une manette Xbox 360 pour testé des jeux quand même et la j'arrive sur l'écran de sélection et impossible de choisir un jeu rien ne bouge ma manette est allumé (me suis peu être trompé d usb en la branchant ) ou je sais pas
Merci de votre aide

from your pictures I can't see much.
What I know is that your Xbox360 pad is not recognized by the Lindbergh, i know this because after the multigame menu 9.6 sign shuold be written xbox360 and I can't see it
did you connect the padin one of the 4 central usb sockets??? don't plug it in the jvs socket!!!!!

If you plugged in the right socket, maybe the pad is not original from microsoft

[vectrex_rox]

on your picture i see the Controller is not connected to a USB Port !

you MUST NOT connect the X360 controller to the JVS Port !!!

you MUST connect X360 controller to one of the USB Ports of the MAINBOARD !

img20160512_104441.jpgimg20160512_104508.jpg
Slt à tous encore un petit pb avec ma lindy 9.6
Explication du pb en premier temps je branche ma lindy sur ma nuc pour sélectionner les jeux la flèche va de bas en haut donc dur de sélectionner les jeux (doit changer i/o ds le moi)
Je décide de la branché sur la télé avec une manette Xbox 360 pour testé des jeux quand même et la j'arrive sur l'écran de sélection et impossible de choisir un jeu rien ne bouge ma manette est allumé (me suis peu être trompé d usb en la branchant ) ou je sais pas
Merci de votre aide

[aurelien123]

on your picture i see the Controller is not connected to a USB Port !

you MUST NOT connect the X360 controller to the JVS Port !!!

you MUST connect X360 controller to one of the USB Ports of the MAINBOARD !


My game pad is connected in the lindbergh but is no reconnu ?

img20160512_104441.jpgimg20160512_104508.jpg
Slt à tous encore un petit pb avec ma lindy 9.6
Explication du pb en premier temps je branche ma lindy sur ma nuc pour sélectionner les jeux la flèche va de bas en haut donc dur de sélectionner les jeux (doit changer i/o ds le moi)
Je décide de la branché sur la télé avec une manette Xbox 360 pour testé des jeux quand même et la j'arrive sur l'écran de sélection et impossible de choisir un jeu rien ne bouge ma manette est allumé (me suis peu être trompé d usb en la branchant ) ou je sais pas
Merci de votre aide

[mar.vetto1]

pad must be connected to one of the 4 usb usb socket located right in the Lindbergh's center

[vectrex_rox]

connect Pad ... here

[aurelien123]

img20160512_153842.jpg

connect Pad ... here

Here ?

[vectrex_rox]

oh ... then it is connected at the correct port !

is it original microsoft controller ?

[aurelien123]

img20160512_154143.jpg

oh ... then it is connected at the correct port !

is it original microsoft controller ?

It's my pad original Microsoft wirless

[vectrex_rox]

i think Controller WIRELESS needs another driver that is not implemented ....

but MAR.VETTO must know better !

[aurelien123]

i think Controller WIRELESS needs another driver that is not implemented ....

but MAR.VETTO must know better !

Ok tanks

[mar.vetto1]

I don't think this pad is compatible, or at least the usb adapter you are using.

you can use usb wired Microsoft version or wireless version with usb wireless Microsoft adapter, original only

[mar.vetto1]

wired:
http://www.ebay.com/itm/New-Official-Mi ... SwUuFW2JZ9

wireless:

http://www.ebay.com/itm/PC-Wireless-Gam ... 0726428465

both must be original microsoft

[lcommander]

do you have 9.5 version or 9.6 version?

9.5 version had problem with Harley, all the otther games work 100%

All the problems you have with games are about the game setting.

both of 9.5 and 9.6 has try and still have the network error

[aurelien123]

do you have 9.5 version or 9.6 version?

9.5 version had problem with Harley, all the otther games work 100%

All the problems you have with games are about the game setting.

I test game tomorrow
I ave à New game pad filaire
My version is 9.6

both of 9.5 and 9.6 has try and still have the network error

[mar.vetto1]

do you have 9.5 version or 9.6 version?

9.5 version had problem with Harley, all the otther games work 100%

All the problems you have with games are about the game setting.

I test game tomorrow
I ave à New game pad filaire
My version is 9.6

both of 9.5 and 9.6 has try and still have the network error

you have for sure some wrong setting inside game network menu

all games are working 100%

[aurelien123]

do you have 9.5 version or 9.6 version?

9.5 version had problem with Harley, all the otther games work 100%

All the problems you have with games are about the
game setting.

I test game tomorrow
I ave à New game pad filaire
My version is 9.6




both of 9.5 and 9.6 has try and still have the network error

you have for sure some wrong setting inside game network menu

all games are working 100%

Yes id5 it's work !!! Est ce qu'on peu réglé la sensibilité de la manette pour moin qu'elle soin sensible ?

[lcommander]

how about After Burner Climax working with XB360 mode?
when the game launch into the test menu the scroll arrow automatically down even the gamepad connected or not?