[Vds] Full kit MVS, Slots MVS, Jeux MVS/ST-V/Naomi, PCB JAMMA, Lindbergh, Ringedge2, IO Alim Ampli Bios Adpt Jamma
- DurbanXe
- stick de bronze
- Messages : 190
- Inscription : 08 nov. 2020, 13:27
- Localisation : Metz
- A remercié : 2 fois
- A été remercié : 10 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Salut,
Je suis intéressé par:
-Burning Fight
-Métal Slug 1
-Métal Slug 2
Je t'envoie un MP
A+
Je suis intéressé par:
-Burning Fight
-Métal Slug 1
-Métal Slug 2
Je t'envoie un MP
A+
- yodaz59
- stick d'argent
- Messages : 669
- Inscription : 28 avr. 2004, 02:25
- Localisation : chez les CH'TI :)
- A remercié : 3 fois
- A été remercié : 4 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
salut , je te prend MS X 034160
la suite en MP
la suite en MP
- darkmehiel
- stick de plastique
- Messages : 27
- Inscription : 03 juil. 2006, 14:08
- A remercié : 1 fois
- A été remercié : 1 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Bonjour,
Bien reçu windjammers et top jeu.
merci .
Bien reçu windjammers et top jeu.
merci .
- Rom1
- stick d'or
- Contact :
- Messages : 1246
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 145 fois
- A été remercié : 271 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Ajout de Magician Loard: 180€
Admirez moi ces belles plaques !
Et Toki (bootleg) avec sa notice officielle de bootleg: 45€
Attention, c'est un boot donc il faut une vraie alim !
Admirez moi ces belles plaques !
Et Toki (bootleg) avec sa notice officielle de bootleg: 45€
Attention, c'est un boot donc il faut une vraie alim !
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
- Neo-Stick
- stick de bronze
- Messages : 100
- Inscription : 14 déc. 2019, 05:22
- Localisation : Canada
- A remercié : 9 fois
- A été remercié : 1 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Je sais pas si tu as reçu mon dernier message (mon MOTW est vendu, donc je peut prendre le Magician Lord + Sengoku + Blues Journey)
Recherche MVS : MATRIMELEE
- yodaz59
- stick d'argent
- Messages : 669
- Inscription : 28 avr. 2004, 02:25
- Localisation : chez les CH'TI :)
- A remercié : 3 fois
- A été remercié : 4 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Salut MSX reçu aujourd'hui , comme toujours envoi au top merci !!!!!
- aXee
- stick de plastique
- Messages : 27
- Inscription : 29 août 2020, 16:18
- Localisation : Paris
- A remercié : 2 fois
- A été remercié : 3 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Hello,
cartouches et slot MVS reçu, tout nickel, merci !
cartouches et slot MVS reçu, tout nickel, merci !
On the road again !
- winterflame
- stick de plomb
- Messages : 80
- Inscription : 27 juin 2020, 15:58
- Localisation : Nantes
- A remercié : 3 fois
- A été remercié : 11 fois
- Neo-Stick
- stick de bronze
- Messages : 100
- Inscription : 14 déc. 2019, 05:22
- Localisation : Canada
- A remercié : 9 fois
- A été remercié : 1 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Les jeux sont arrivés en mode fast track
Toujours au top ! Merci Romain !!
Toujours au top ! Merci Romain !!
Recherche MVS : MATRIMELEE
- DaVinci
- stick de plastique
- Messages : 13
- Inscription : 28 nov. 2020, 12:34
- Localisation : Paris
- A remercié : 0
- A été remercié : 0
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Bonjour,
Je suis intéressé par :
Shock Troopers 014793
Toujours disponible ?
Je t'envoie un MP
Merci
Je suis intéressé par :
Shock Troopers 014793
Toujours disponible ?
Je t'envoie un MP
Merci
- djalex
- stick de bronze
- Messages : 111
- Inscription : 30 juil. 2019, 00:41
- Localisation : 69
- A remercié : 0
- A été remercié : 5 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Salut Romain,
concernant le Toki, si je l'utilise avec un supergun et une alim PC, ça devrait suffire non ?
Merci pour ton retour
--------------------
J'ai glissé chef !
J'ai glissé chef !
- geronimo1979
- stick de zinc
- Messages : 461
- Inscription : 18 juil. 2010, 14:53
- Localisation : Lyon
- A remercié : 2 fois
- A été remercié : 3 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
salut!
tu proposes pas mal de choses interessantes !!! je voulais savoir si tu avais une interface pour connecté du jamma dans une borne MVS U4 ?
tu proposes pas mal de choses interessantes !!! je voulais savoir si tu avais une interface pour connecté du jamma dans une borne MVS U4 ?
INSTAGRAM : https://www.instagram.com/geronimo1979/?hl=fr
- Rom1
- stick d'or
- Contact :
- Messages : 1246
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 145 fois
- A été remercié : 271 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Oui ça fonctionne, il démarre à 4.8v, mais je crois qu'il faut du -5v pour le son - pas sur que ton alim le fournisse (mais peut être le supergun).
Dans tous les cas il a été vendu :/
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
- Rom1
- stick d'or
- Contact :
- Messages : 1246
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 145 fois
- A été remercié : 271 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Mercigeronimo1979 a écrit : ↑05 déc. 2020, 17:05 salut!
tu proposes pas mal de choses interessantes !!! je voulais savoir si tu avais une interface pour connecté du jamma dans une borne MVS U4 ?
Malheureusement je n'ai pas d'adaptateur PCB Jamma vers borne MVS, uniquement l'inverse.
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
- Rom1
- stick d'or
- Contact :
- Messages : 1246
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 145 fois
- A été remercié : 271 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Ajout d'une dizaine de slot MV1 stéréo, FZ et FZS.
Ajout d'un Windjammer original avec label repro.
Ajout d'un Windjammer original avec label repro.
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
-
- stick de plastique
- Messages : 34
- Inscription : 28 juil. 2020, 18:43
- Localisation : Palaiseau
- A remercié : 0
- A été remercié : 0
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Hello,
MP slot stereo et shock troopers MVS.
Nicolas.
MP slot stereo et shock troopers MVS.
Nicolas.
darkstalker@neogeofans.fr, darkstalker@hardware.fr, sunaiac@vogons.org, sunaiac@cpu-world.com, sunaiac@neo-arcadia.com
- Royaltea
- stick d'argent
- Messages : 577
- Inscription : 08 sept. 2020, 10:28
- A remercié : 28 fois
- A été remercié : 14 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Bonjour
Je reviendrait vers toi dans quelques jours pour au moins :
Une rallonge alim ring edge
Un bios Naomi netdimm. ??
Un bios mvs ?
Dès mvs (ironclad, windjammer...), samourai 1, voir 3 et 4...
Éventuellement des pcb
Merci
Ps et last hope tant qu as faire
Je reviendrait vers toi dans quelques jours pour au moins :
Une rallonge alim ring edge
Un bios Naomi netdimm. ??
Un bios mvs ?
Dès mvs (ironclad, windjammer...), samourai 1, voir 3 et 4...
Éventuellement des pcb
Merci
Ps et last hope tant qu as faire
-
- stick de bronze
- Messages : 149
- Inscription : 24 nov. 2017, 22:47
- A remercié : 1 fois
- A été remercié : 1 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Salut,
Je suis intéressé par :
Pop'n Bounce « serial 1230 » - 45€
Street Hoop « serial 18349 » - 45€
King of Fighters '97, The - 30€
Top hunter « serial 5782 » - 75€
King of Fighters 2000, The - 60€ ?
C’est possible d’avoir d’autres photos ?
Tu peux me dire si toutes les cartouches sont 100% originales ? (pcb, chip et stickers)
Je suis intéressé par :
Pop'n Bounce « serial 1230 » - 45€
Street Hoop « serial 18349 » - 45€
King of Fighters '97, The - 30€
Top hunter « serial 5782 » - 75€
King of Fighters 2000, The - 60€ ?
C’est possible d’avoir d’autres photos ?
Tu peux me dire si toutes les cartouches sont 100% originales ? (pcb, chip et stickers)
- Rom1
- stick d'or
- Contact :
- Messages : 1246
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 145 fois
- A été remercié : 271 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Baisse de prix sur l'alim 24v et l'ampli SEGA. Ajout d'alim Lindbergh, IO boards et câblages.
Alimentation SEGA Lindbergh Nipron PS6146 / 400-5473 + câblage - 35€
Alimentation Sega/Namco 3L014-2 - 45€
A priori de chez COSEL LDA50S-24 en 24V 2.5A
Ampli audio SEGA SJ25-0361-01 - 45€
IO SEGA type3 837-14572 + câblage - 95€
Câblage SEGA 605-0161 - 5€
Câblage SEGA COM1 COM2 - 5€
Alimentation SEGA Lindbergh Nipron PS6146 / 400-5473 + câblage - 35€
Alimentation Sega/Namco 3L014-2 - 45€
A priori de chez COSEL LDA50S-24 en 24V 2.5A
Ampli audio SEGA SJ25-0361-01 - 45€
IO SEGA type3 837-14572 + câblage - 95€
Câblage SEGA 605-0161 - 5€
Câblage SEGA COM1 COM2 - 5€
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
- Rom1
- stick d'or
- Contact :
- Messages : 1246
- Inscription : 26 avr. 2016, 00:07
- Localisation : Aperture Science Enrichment Center
- A remercié : 145 fois
- A été remercié : 271 fois
Re: [Vds] PCB JAMMA, Ringedge2, Slots MVS+Unibios, jeux MVS & STV, Adaptateurs JAMMA/Jeutel/System16/MVS
Baisse sur les JAMMA:
Originaux
Bootlegs
Lots de PCB JAMMA Bootlegs à réparer
Lot 1 - Bootlegs - 30€
Originaux
- Battle K Road (Pyskio) 60,00 €
- New Fantasia (Comad) 30,00 €
- Gun Dealer (DooYong) 10,00 €
- Dragon Bowl 40,00 €
- Splash (Gaelco) 20,00 €
- Splash (Gaelco) 20,00 €
- The Avengers, Captain America (Data East) 145,00 €
- The Avengers, Captain America (Data East) 145,00 €
- Final Lap (Namco) 80€
Attention: JAMMA + harness spécial pour volant/accélérateur/stéréo: je n'ai pas pu tester les contrôles.
- Dark Seal (Data East) 170€
Bootlegs
- Euro League (hack of Tecmo Worldcup 90) 15,00 €
- Euro League (hack of Tecmo Worldcup 90) 15,00 €
- Euro League (hack of Tecmo Worldcup 90) 15,00 €
- Euro League (hack of Tecmo Worldcup 90) 15,00 €
- Euro League (hack of Tecmo Worldcup 90) 15,00 €
- Euro League (hack of Tecmo Worldcup 90) 15,00 €
- Euro League (hack of Tecmo Worldcup 90) 15,00 €
- Euro League (hack of Tecmo Worldcup 90) 15,00 €
- Hard head (Suna) 20,00 €
- Knights of the Round (Capcom) 40,00 €
- Master Ninja (hack de Shadow Warrior) 20,00 €
- Pocket Gal 2 (Data East) (Yada East, Sexy billard) 20,00 €
- Pocket Gal 2 (Data East) (Yada East, Sexy billard) 20,00 €
- Power Spike 20,00 €
- Saboten Bomber 25,00 €
- Super Ranger (Suna) 25,00 €
- Super Ranger (Suna) 25,00 €
- The King of Dragons (Capcom) 50,00 €
- Tumblepop 20,00 €
- Tumblepop 20,00 €
- Wrestlefest (Technos) 50,00 €
Lots de PCB JAMMA Bootlegs à réparer
Lot 1 - Bootlegs - 30€
- Wonder Boy 3, Glitch graph
- DD Crew, glitch son et background
- Fighting Soccer (SNK), sans son et leger glitch graphique
- Gumbo, Input HS
- Legend of Hero Tonma, HS
- Pang, Son KO
- Wonder Boy 3, glitch
- Legend of Hero Tonma, gros bugs graphiques
- Mexico 86, KO
- Pipi & Bibis, son qui siffle
- Super Ranger (Suna), Glitch qui disparait si on appuis
- V'Ball, KO
Ventes SEGA Ringedge, Slots/jeux/converts MVS, Adaptateurs MVS/JAMMA/Jeutel/System16, Capkit MTC9000, Bios Naomi, etc.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.
Achats & Réparations NeoGeo MVS, Namco ES3, Sega RingEdge, Sega ST-V, S16, CPS3, etc. Contactez moi en MP.
DSB Clone - SEGA Digital Sound Board replacement.