[PRE COMMANDE] Projet Astro FAN

Vente de jeux et matériels pour bornes d'arcade.
Achetez et vendez tout ce qui se branche dans une borne.
Sale of games and equipment for arcade cabinets.
Buy and sell everything that can be connected to an arcade cabinet.
Message
Auteur
candelwick
stick de plastique
Messages : 8
Inscription : 01 avr. 2024, 15:02
A remercié : 0
A été remercié : 0

Re: [PRE COMMANDE] Projet Astro FAN

#26 Message par candelwick »

Intéressé ! Merci

Avatar de l’utilisateur
Enskynet
Le magnifique
Messages : 2254
Inscription : 26 déc. 2020, 18:30
A remercié : 207 fois
A été remercié : 221 fois

Re: [PRE COMMANDE] Projet Astro FAN

#27 Message par Enskynet »

Commande de ventilateurs et connecteurs supplémentaires envoyée aujourd'hui !

C'est bientôt de nouveau dispo pour expédition, n'hésitez pas !!!

Thchardcore
stick de plastique
Messages : 15
Inscription : 03 juin 2019, 03:30
A remercié : 5 fois
A été remercié : 1 fois

Re: [PRE COMMANDE] Projet Astro FAN

#28 Message par Thchardcore »

If you are using these for non-standard application (Versus City), wiring is very easy to adapt to PSU. Instead of building entire pass through adapter for entire Tyco AMP UP plug, you use a paperclip to depin the existing 12v termimal pin and then create a 2 pin adapter with new AMP UP connector using the original terminal pin you removed and a 2 new wires crimped to one new terminal pin. A one position AMP UP works but I like to use two position connector and run separate splits for each fan.

This is easy solution instead of hacking up original wiring. Only need a crimper and less than $10 in parts. Bonus is you can easily unplug fan at source if you ever need to remove the monitor.

Avatar de l’utilisateur
Enskynet
Le magnifique
Messages : 2254
Inscription : 26 déc. 2020, 18:30
A remercié : 207 fois
A été remercié : 221 fois

Re: [PRE COMMANDE] Projet Astro FAN

#29 Message par Enskynet »

Thchardcore a écrit : 08 mars 2025, 09:02 If you are using these for non-standard application (Versus City), wiring is very easy to adapt to PSU. Instead of building entire pass through adapter for entire Tyco AMP UP plug, you use a paperclip to depin the existing 12v termimal pin and then create a 2 pin adapter with new AMP UP connector using the original terminal pin you removed and a 2 new wires crimped to one new terminal pin. A one position AMP UP works but I like to use two position connector and run separate splits for each fan.

This is easy solution instead of hacking up original wiring. Only need a crimper and less than $10 in parts. Bonus is you can easily unplug fan at source if you ever need to remove the monitor.
Thank you for the feedback and tips for versus !

takumi
stick d'argent
Messages : 552
Inscription : 27 mai 2005, 06:47
Localisation : 95
A remercié : 1 fois
A été remercié : 4 fois

Re: [PRE COMMANDE] Projet Astro FAN

#30 Message par takumi »

up
Image

david68000
stick de plastique
Messages : 5
Inscription : 29 janv. 2024, 13:49
A remercié : 0
A été remercié : 1 fois

Re: [PRE COMMANDE] Projet Astro FAN

#31 Message par david68000 »

Bonjour,

Suis intéressé par un kit pour NAC.

Merci,

David.

takumi
stick d'argent
Messages : 552
Inscription : 27 mai 2005, 06:47
Localisation : 95
A remercié : 1 fois
A été remercié : 4 fois

Re: [PRE COMMANDE] Projet Astro FAN

#32 Message par takumi »

david68000 a écrit : 05 avr. 2025, 13:57 Bonjour,

Suis intéressé par un kit pour NAC.

Merci,

David.
salut
je t'ai envoyé un mp
Image

Sparda
stick de bronze
Messages : 245
Inscription : 14 mai 2011, 00:21
A remercié : 1 fois
A été remercié : 1 fois

Re: [PRE COMMANDE] Projet Astro FAN

#33 Message par Sparda »

+1 pour une version Egret 2 ;)

Avatar de l’utilisateur
Enskynet
Le magnifique
Messages : 2254
Inscription : 26 déc. 2020, 18:30
A remercié : 207 fois
A été remercié : 221 fois

Re: [PRE COMMANDE] Projet Astro FAN

#34 Message par Enskynet »

Sparda a écrit : 09 avr. 2025, 15:08 +1 pour une version Egret 2 ;)
Pour l'instant la version Egret 2 est en cours de modélisation. La frame ne se prete pas à L'Astro Fan

Sparda
stick de bronze
Messages : 245
Inscription : 14 mai 2011, 00:21
A remercié : 1 fois
A été remercié : 1 fois

Re: [PRE COMMANDE] Projet Astro FAN

#35 Message par Sparda »

Yep, j'avais bien compris, c'était surtout pour montrer mon intérêt ;)

takumi
stick d'argent
Messages : 552
Inscription : 27 mai 2005, 06:47
Localisation : 95
A remercié : 1 fois
A été remercié : 4 fois

Re: [PRE COMMANDE] Projet Astro FAN

#36 Message par takumi »

up
Image

Thchardcore
stick de plastique
Messages : 15
Inscription : 03 juin 2019, 03:30
A remercié : 5 fois
A été remercié : 1 fois

Re: [PRE COMMANDE] Projet Astro FAN

#37 Message par Thchardcore »

I think the New Net City would greatly benefit from a fan inside the monitor cover. Since the monitor frame is slightly different, is it possible to adapt the design to use in this scenario?

Avatar de l’utilisateur
Tochiro76
stick de bronze
Messages : 135
Inscription : 21 déc. 2021, 16:12
A remercié : 9 fois
A été remercié : 6 fois

Re: [PRE COMMANDE] Projet Astro FAN

#38 Message par Tochiro76 »

Bonjour.
Je débarque après une longue absence.
Intéressé pour mon astro si possible.
Je viens de me rendre compte que c’est toi qui a capkitté mon alim également
Merci :-D
Dernière modification par Tochiro76 le 26 avr. 2025, 11:32, modifié 1 fois.

Avatar de l’utilisateur
Enskynet
Le magnifique
Messages : 2254
Inscription : 26 déc. 2020, 18:30
A remercié : 207 fois
A été remercié : 221 fois

Re: [PRE COMMANDE] Projet Astro FAN

#39 Message par Enskynet »

Thchardcore a écrit : 25 avr. 2025, 21:44 I think the New Net City would greatly benefit from a fan inside the monitor cover. Since the monitor frame is slightly different, is it possible to adapt the design to use in this scenario?
Working on it dude

news very soon ;)

takumi
stick d'argent
Messages : 552
Inscription : 27 mai 2005, 06:47
Localisation : 95
A remercié : 1 fois
A été remercié : 4 fois

Re: [PRE COMMANDE] Projet Astro FAN

#40 Message par takumi »

up
Image

takumi
stick d'argent
Messages : 552
Inscription : 27 mai 2005, 06:47
Localisation : 95
A remercié : 1 fois
A été remercié : 4 fois

Re: [PRE COMMANDE] Projet Astro FAN

#41 Message par takumi »

up
Image

Avatar de l’utilisateur
squallrs
GameThemUP
Messages : 2945
Inscription : 20 juil. 2012, 20:43
Localisation : 06
A remercié : 44 fois
A été remercié : 161 fois

Re: [PRE COMMANDE] Projet Astro FAN

#42 Message par squallrs »

Je viens de tombé sur le poste, pas mal le plug&play !
Je l'avais fait sur ma platine chinoise il y a 3 ans de ça, et ca a vraiment fiabilisé la platine en plus de leger changement que j'ai fait en plus.
Elle tourne sans aucun soucis depuis, vraiment une modif necessaire pour les longues sessions ou platine bas de game ou fragiles.
b8efccf7-0a5a-45d1-89c5-c90651177dbc.jpeg
20a02ea2-b59f-454f-9e59-1ff26bd605ef.jpeg
Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
https://www.youtube.com/c/GameThemUP

Image

Nouveau Serveur Discord mis en place, rejoins nous !
GameThemUP : https://discord.gg/9tYgjZQhcB

Répondre