"Gunsmoke Brown 3 Control Panel Overlay" (ROMSTAR) reproduction printed in vinyl with rough protective lamination (photo 1).
"Gunsmoke Brown 3 Control Panel Overlay" (ROMSTAR) reproduction printed in vinyl with rough protective lamination (photo 2).
"Gunsmoke Brown 3 Control Panel Overlay" (ROMSTAR) reproduction printed in vinyl with rough protective lamination (photo 3).
"Naomi Universal Cabinet ¥100 Insert Coin Label" (SEGA). Restored Mikonos & Zona Arcade.
"Ridge Racer 2 Seat Decal" (NAMCO) Arcade cockpit artwork in restoration by Zona Arcade and Mikonos.
"The Typing of The Dead Marquee" (SEGA - NAOMI) reproduction printed in High Quality Backllite (photo 1).
"The Typing of The Dead Marquee" (SEGA - NAOMI) reproduction printed in High Quality Backllite (photo 2).
"The Typing of The Dead Marquee" (SEGA - NAOMI) reproduction printed in High Quality Backllite (photo 3).
"The Typing of The Dead Marquee" (SEGA - NAOMI) reproduction printed in High Quality Backllite (photo 4).
"Gunblade Special Air Assault Force NY Upper Dash Board original by SEGA for cockpit arcade cabinet. Artwork in restoration by Zona Arcade and Mikonos (photo 1).
"Gunblade Special Air Assault Force NY Upper Side Art" (SEGA). Arcade artwork in restoration by Zona Arcade and Mikonos (photo 2).
Original "Asian Dynamite Marquee" (SEGA) for to scan and to restore by Zona Arcade / Mikonos (photo 1).
Original "Asian Dynamite Marquee" (SEGA) for to scan and to restore by Zona Arcade / Mikonos (photo 2).
"Gunsmoke Control Panel Overlay - Brown 2" (ROMSTAR) restored by Zona Arcade & Mikonos.
"Operation Wolf Start Button Sticker for Gun" (TAITO) printed in vinyl with glossy protective lamination and precut (photo 1).
"Operation Wolf Start Button Sticker for Gun" (TAITO) printed in vinyl with glossy protective lamination and precut (photo 2).
"Operation Wolf Start Button Sticker for Gun" (TAITO) printed in vinyl with glossy protective lamination and precut (photo 3).
Some users told me about a printint test if I think I would get a better results of actual. I like challenges and I knew how to do it!
With "Out Run Steering Wheel Emblem" artwork from SEGA restored some weeks ago, let´s go to start.
My point is to get the best aproximation possible for you with a few money .
- What I need?
1) A perfect restoration or original designing, it is 50% of our succesful!
"Out Run Steering Wheel Emblem Sticker" (SEGA). Restored by Zona Arcade & Mikonos.
Out%20Run%20Steering%20Wheel%20Emblem%20Sticker.%20Restored%20Mikonos1.jpg
2) An ideal print support. In this case the best option was a piece of "Pearled Silver Vinyl (3M)". It is 20 % of a good printed work!
Pearled Silver Vinyl (3M). Photos by Mikonos
Because I want to order a cheap test, I had the idea of a transparent paper.
3) A colour match test (one or more) for to compare with original piece. It is 10% for to get a perfect work!
In this example, we can not see a conventional colour match test, but it works almost in same way.
"Out Run Steering Wheel Emblem Sticker Samples" (SEGA). By Zona Arcade & Mikonos.
First Sample: This was my first aproximation to original printed designing through photos. To have original emblem, it would have been optimal.
Second Sample: Transparent colours at 80% but black.
Third Sample: 25% Brighness reduced.
*From left to right.
4) Good print machine: No banding, no grain, no error, perfect accuracy, good inks, etc. It is anoher 20% for a perfect work!
- How much and why was so cheap?
The most expensive thing was "Pearled Silver Vinyl (3M). It cost about 30€ per metre, but I have a sample from a old customized work I did for a friend and his bike.
If you have courious, you can check it here:
Link:
http://https://zonaarcade.forumcommunit ... y394334901
The price for a transparent paper with a colour printeing is 0,50€.
- Let´s see the result!
Well, let´s go that results speak by me. It is the best way.
"Out Run Steering Wheel Emblem Samples (SEGA) printed in a transparent paper (photo 1).
"Out Run Steering Wheel Emblem Samples (SEGA) printed in a transparent paper over a white sheet of paper (photo 2).
"Out Run Steering Wheel Emblem Samples (SEGA) printed in a transparent paper over "Pearled Silver Vinyl (3M) (photo 3).
"Out Run Steering Wheel Emblem Samples (SEGA) printed in a transparent paper over "Pearled Silver Vinyl (3M) (photo 4).
"Out Run Steering Wheel Emblem Samples (SEGA) printed in a transparent paper over "Pearled Silver Vinyl (3M) (photo 5).
"Out Run Steering Wheel Emblem Samples (SEGA) printed in a transparent paper over "Pearled Silver Vinyl (3M) (photo 6).
"Out Run Steering Wheel Emblem Samples (SEGA) printed in a transparent paper over "Pearled Silver Vinyl (3M) (photo 7).
- What is your analysis?
I was very sure about first sample and it was the winner in my opinion.
This aproximation is the best I saw to original. I think it honestly!
The most important for us: it can be cheap, even with a glossy protective lamination and a precut by machine.
I think it can become an easy spare for to stick over your original. In that way, you will conserve your original.
- From this point to...
You can use my information, techniques, experience, knowlege about print materials, etc like you want. You are free to use all these for your own benefit or for to do business, it is all the same to me.
If you want to do me a request about this piece for to check this result from me; Ok!No problem! You are welcome, but use my p.m or mail. Don´t use this thread, please!
Greetings!
"Out Run Steering Wheel Emblem Sticker" (SEGA). How to print it! Preparation process by Mikonos.
"Point Blank Side Arts" (NAMCO) arcade artworks in restoration by Zona Arcade and Mikonos.
"Qubes Side Art" (MYLSTAR ELECTRONICS, INC.) arcade artwork restored by Mikonos.
Details in "Qubes Side Art" (MYLSTAR ELECTRONICS, INC.) restoration by Mikonos.
"Chopliffter Bezel" (SEGA) arcade artwork restored by Mikonos.
Details in "Choplifter Bezel" (SEGA) arcade artwork restored by Mikonos.
"Hydro Thunder Marquee" (Midway) restored by Mikonos for Zona Arcade Web.
Details in "Hydro Thunder Marquee" (Midway) restoration by Mikonos.
"The King of Fighers ´94 Wide Marquee" (SNK) for upright cabinets restored by Mikonos.
Details in "The King of Fighters '94 Wide Marquee" for upright cabinets restored by Mikonos.
31--->
pg
